联系我们
公司名称：XXX
电话：XXX
手机：XXX
联系人：XXX
地址：XXX
新闻动态
装修质量验收
质量验收
Quality acceptance
验收项目
project subject to check and delivery
1、入场前
1. Before Entry
看拆改项目是否符合合同规定，是否存在安全隐患，墙面处理是否干净，进场材料的数量、等级、规格是否与事先约定的相符。
See whether the demolition and alteration project meets the contract requirements, whether there are potential safety hazards, whether the wall treatment is clean, and whether the quantity, grade and specifications of the entrance materials are in conformity with the prior agreement.
2、水电路
2. Hydroelectric Circuits
第二阶段的验收应该是一次水 路、电路改造的单独验收，消费者要在专业水工或电工的操作下检查所有的改造线路是否通畅， 布局是否合理，操作是否规范，并重新确认线路改造的实际尺寸。只有线路改好后，腻子工才可以接下去封墙、 刮腻子。
The acceptance of the second stage should be a separate acceptance of water and circuit transformation. Consumers should check whether all reconstructed lines are unobstructed, the layout is reasonable and the operation is standardized under the operation of professional hydraulic or electrical workers, and reconfirm the actual size of the reconstructed lines. Only after the line has been improved can putty workers continue to seal the wall and scrape putty.
3、木工活儿尺寸
3. Woodworking Dimensions
第三次验收要在木工基础做完之后，此时房间内的吊顶和石膏线也都应该施工完毕，厨房和卫生间的墙面砖也已贴好，同时需要粉刷的墙面应刮完两遍腻子。这 个阶段的验收工作非常重要，消费者应仔细核对图纸，确认各部位的尺寸，如发现不符 的地方，要及时提示施工队修改。
After the third acceptance, the ceiling and gypsum line in the room should also be completed. The wall tiles in the kitchen and toilet have been pasted. At the same time, the wall which needs painting should be scraped twice. The acceptance work at this stage is very important. Consumers should carefully check the drawings and confirm the size of each part. If discrepancies are found, construction teams should be prompted to modify them.
4、木工活儿质量
4. Woodworking quality
当所有细木制品的饰面板贴好，木线粘钉完毕后，消费者就可以进行第四阶段的验收。这个时间基本处于工期过半的时候，这个阶段的检查 要偏重于木制品 的色差和纹理以及大面积的平整度和缝隙是否均匀。
When all the veneer panels of the fine wood products are affixed and the wooden thread is affixed, consumers can carry out the fourth stage of acceptance and acceptance. This time is basically in the middle of the construction period, this stage of inspection should focus on the color difference and texture of wood products, as well as large areas of flatness and uniformity of cracks.
木制品完工后，油工就可以开始进行底漆处理工作，同时所有地砖也应该在这个阶段内贴完，这是分阶段验收中的第五个阶段。
After the wood products are finished, the oiler can start the primer treatment. At the same time, all floor tiles should be pasted in this stage. This is the fifth stage in the phased acceptance.
Quality acceptance
验收项目
project subject to check and delivery
1、入场前
1. Before Entry
看拆改项目是否符合合同规定，是否存在安全隐患，墙面处理是否干净，进场材料的数量、等级、规格是否与事先约定的相符。
See whether the demolition and alteration project meets the contract requirements, whether there are potential safety hazards, whether the wall treatment is clean, and whether the quantity, grade and specifications of the entrance materials are in conformity with the prior agreement.
2、水电路
2. Hydroelectric Circuits
第二阶段的验收应该是一次水 路、电路改造的单独验收，消费者要在专业水工或电工的操作下检查所有的改造线路是否通畅， 布局是否合理，操作是否规范，并重新确认线路改造的实际尺寸。只有线路改好后，腻子工才可以接下去封墙、 刮腻子。
The acceptance of the second stage should be a separate acceptance of water and circuit transformation. Consumers should check whether all reconstructed lines are unobstructed, the layout is reasonable and the operation is standardized under the operation of professional hydraulic or electrical workers, and reconfirm the actual size of the reconstructed lines. Only after the line has been improved can putty workers continue to seal the wall and scrape putty.
3、木工活儿尺寸
3. Woodworking Dimensions
第三次验收要在木工基础做完之后，此时房间内的吊顶和石膏线也都应该施工完毕，厨房和卫生间的墙面砖也已贴好，同时需要粉刷的墙面应刮完两遍腻子。这 个阶段的验收工作非常重要，消费者应仔细核对图纸，确认各部位的尺寸，如发现不符 的地方，要及时提示施工队修改。
After the third acceptance, the ceiling and gypsum line in the room should also be completed. The wall tiles in the kitchen and toilet have been pasted. At the same time, the wall which needs painting should be scraped twice. The acceptance work at this stage is very important. Consumers should carefully check the drawings and confirm the size of each part. If discrepancies are found, construction teams should be prompted to modify them.
4、木工活儿质量
4. Woodworking quality
当所有细木制品的饰面板贴好，木线粘钉完毕后，消费者就可以进行第四阶段的验收。这个时间基本处于工期过半的时候，这个阶段的检查 要偏重于木制品 的色差和纹理以及大面积的平整度和缝隙是否均匀。
When all the veneer panels of the fine wood products are affixed and the wooden thread is affixed, consumers can carry out the fourth stage of acceptance and acceptance. This time is basically in the middle of the construction period, this stage of inspection should focus on the color difference and texture of wood products, as well as large areas of flatness and uniformity of cracks.
木制品完工后，油工就可以开始进行底漆处理工作，同时所有地砖也应该在这个阶段内贴完，这是分阶段验收中的第五个阶段。
After the wood products are finished, the oiler can start the primer treatment. At the same time, all floor tiles should be pasted in this stage. This is the fifth stage in the phased acceptance.
